Skip to content
FacebookTwitterYouTubeInstagramLinkedIn
Bureau of Metrology Logo
  • ABOUT US
    • Activities
    • Organization
      • Department of metrological traceability and national standards
        • Department for scientific metrology
        • Department for industrial metrology
        • Department for the ensuring of metrological traceability
      • Sector for Verification of Measuring Instruments
        • Section for measuring instruments intended for use in trade and check of pre-packed products
        • Section for measuring instruments used for the protection of human and animal health and of general safety and security
        • Section for measuring instruments intended for use in the protection of property, environment and natural resources, occupational health and safety, protection against accidents and traffic control
      • Section for Control of Precious Metal Articles
      • Section for International Cooperation
      • Service for administration and finance
    • Scientific-research activity
    • Meet Our Team
      • Organization Scheme
      • Biographies
      • List of Employees
    • Professional training
  • SERVICES
    • Calibration of measuring instruments/measurement standards
      • Laboratory for Mass
      • Laboratory for Large Mass
      • Laboratory for Pressure
      • Laboratory for Length
      • Laboratory for Electrical Quantities
      • Laboratory for Electrical Power
      • Laboratory for Temperature
      • Laboratory for Time and Frequency
      • Laboratory for Small Volumes
      • Laboratory for Large Volumes
      • Laboratory for Ionizing Radiation
    • Verification of measuring instruments
      • Authorized persons
      • Laboratory for verification of instruments measuring speed of vehicles
      • Laboratory for verification of Breath Analysers
      • Laboratory for Testing of Pre-Packaged Products
      • Laboratory for verification of measuring instruments used in geodesy
      • Laboratory for verification of phonometers
      • Laboratory for verification of flue gas analysers
    • Control of precius metal articles
      • Laboratory for Testing of Precious Metal Articles
      • Importers’/ Manufacturers’ Mark
    • Type approval
      • Approved types of measuring instruments
  • QUALITY SYSTEM
    • Quality Committee
    • CMC
      • BIPM KCDB
    • CAF
  • INTERNATIONAL COOPERATION
  • PROJECTS
  • LIBRARY
    • Regulations
    • Requests
    • Internal acts
    • Journal
      • Official Metrology Journal 1
      • Official Metrology Journal 2
      • Official Metrology Journal 3
      • Official Metrology Journal 4
      • Official Metrology Journal 5
      • Official Metrology Journal 6
      • Official Metrology Journal 7
      • Official Metrology Journal 8
      • Official Metrology Journal 9
      • Metrološki glasnik 10
    • Work program
      • 2013.
      • 2014.
      • 2015.
      • 2016.
      • 2017.
      • 2018.
      • 2019.
      • 2020.
      • 2021.
      • 2022.
      • 2023.
    • Work report
      • 2012.
      • 2013.
      • 2014.
      • 2015.
      • 2016.
      • 2017.
      • 2018.
      • 2019.
      • 2020.
      • 2021.
      • 2022.
    • Communications strategy 2019-2021.
      • Akcioni plan za 2020.
      • Evaluacija KS jan-dec-2019
      • KS
      • Evaluacija KS jan – dec 2020.
    • CAF akcioni plan 2020 – 2022.
    • Publications
      • Monografija – 10 godina
      • Brochures
      • Leaflets
      • Posters
      • History of metrology
      • Etalon vašeg povjerenja
      • Svjetski dan metrologije 2021.
      • Bilten – 15 godina
    • Archived
  • MEDIA CENTAR
    • News
    • Portal analitika
      • Ko ima najtačniji metar i najtačniji kilogram u Crnoj Gori?
      • Kristali crnogorskih učenika pred žirijem
      • I nakit mora na pregled rendgenom
      • Sektor za ovjeravanje mjerila garant preciznosti u Crnoj Gori
      • Kilogram je mrtav! Živio kilogram!
      • Podrška svima kojima je tačno mjerenje temperature važno
      • Borba sa nevidljivim protivnikom: Radioaktivna opasnost u našim domovima
      • Pouzdanost taksimetara neopodno kontrolisati na svakih godinu dana
      • Najprecizniji sat u Crnoj Gori i njegova uloga u mjerenju tačnog vremena u svijetu
    • Press clipping
    • Gallery
      • 08.-13.09.2016. Istorija metrologije
      • 25-27.09.2018. Art of Measurement
      • 10.10.2018. Why are measurements important
      • dec. 2018. – maj 2019. Ljepota kristala
      • 20.05.2019. Dodjela nagrada
      • Workshop: „Chemistry All Around Us“
    • Video
    • Click on Lab
  • CONTACT
  • English
    • Crnogorski Crnogorski
  • ABOUT US
    • Activities
    • Organization
      • Department of metrological traceability and national standards
        • Department for scientific metrology
        • Department for industrial metrology
        • Department for the ensuring of metrological traceability
      • Sector for Verification of Measuring Instruments
        • Section for measuring instruments intended for use in trade and check of pre-packed products
        • Section for measuring instruments used for the protection of human and animal health and of general safety and security
        • Section for measuring instruments intended for use in the protection of property, environment and natural resources, occupational health and safety, protection against accidents and traffic control
      • Section for Control of Precious Metal Articles
      • Section for International Cooperation
      • Service for administration and finance
    • Scientific-research activity
    • Meet Our Team
      • Organization Scheme
      • Biographies
      • List of Employees
    • Professional training
  • SERVICES
    • Calibration of measuring instruments/measurement standards
      • Laboratory for Mass
      • Laboratory for Large Mass
      • Laboratory for Pressure
      • Laboratory for Length
      • Laboratory for Electrical Quantities
      • Laboratory for Electrical Power
      • Laboratory for Temperature
      • Laboratory for Time and Frequency
      • Laboratory for Small Volumes
      • Laboratory for Large Volumes
      • Laboratory for Ionizing Radiation
    • Verification of measuring instruments
      • Authorized persons
      • Laboratory for verification of instruments measuring speed of vehicles
      • Laboratory for verification of Breath Analysers
      • Laboratory for Testing of Pre-Packaged Products
      • Laboratory for verification of measuring instruments used in geodesy
      • Laboratory for verification of phonometers
      • Laboratory for verification of flue gas analysers
    • Control of precius metal articles
      • Laboratory for Testing of Precious Metal Articles
      • Importers’/ Manufacturers’ Mark
    • Type approval
      • Approved types of measuring instruments
  • QUALITY SYSTEM
    • Quality Committee
    • CMC
      • BIPM KCDB
    • CAF
  • INTERNATIONAL COOPERATION
  • PROJECTS
  • LIBRARY
    • Regulations
    • Requests
    • Internal acts
    • Journal
      • Official Metrology Journal 1
      • Official Metrology Journal 2
      • Official Metrology Journal 3
      • Official Metrology Journal 4
      • Official Metrology Journal 5
      • Official Metrology Journal 6
      • Official Metrology Journal 7
      • Official Metrology Journal 8
      • Official Metrology Journal 9
      • Metrološki glasnik 10
    • Work program
      • 2013.
      • 2014.
      • 2015.
      • 2016.
      • 2017.
      • 2018.
      • 2019.
      • 2020.
      • 2021.
      • 2022.
      • 2023.
    • Work report
      • 2012.
      • 2013.
      • 2014.
      • 2015.
      • 2016.
      • 2017.
      • 2018.
      • 2019.
      • 2020.
      • 2021.
      • 2022.
    • Communications strategy 2019-2021.
      • Akcioni plan za 2020.
      • Evaluacija KS jan-dec-2019
      • KS
      • Evaluacija KS jan – dec 2020.
    • CAF akcioni plan 2020 – 2022.
    • Publications
      • Monografija – 10 godina
      • Brochures
      • Leaflets
      • Posters
      • History of metrology
      • Etalon vašeg povjerenja
      • Svjetski dan metrologije 2021.
      • Bilten – 15 godina
    • Archived
  • MEDIA CENTAR
    • News
    • Portal analitika
      • Ko ima najtačniji metar i najtačniji kilogram u Crnoj Gori?
      • Kristali crnogorskih učenika pred žirijem
      • I nakit mora na pregled rendgenom
      • Sektor za ovjeravanje mjerila garant preciznosti u Crnoj Gori
      • Kilogram je mrtav! Živio kilogram!
      • Podrška svima kojima je tačno mjerenje temperature važno
      • Borba sa nevidljivim protivnikom: Radioaktivna opasnost u našim domovima
      • Pouzdanost taksimetara neopodno kontrolisati na svakih godinu dana
      • Najprecizniji sat u Crnoj Gori i njegova uloga u mjerenju tačnog vremena u svijetu
    • Press clipping
    • Gallery
      • 08.-13.09.2016. Istorija metrologije
      • 25-27.09.2018. Art of Measurement
      • 10.10.2018. Why are measurements important
      • dec. 2018. – maj 2019. Ljepota kristala
      • 20.05.2019. Dodjela nagrada
      • Workshop: „Chemistry All Around Us“
    • Video
    • Click on Lab
  • CONTACT
  • English
    • Crnogorski Crnogorski
  • ABOUT US
    • Activities
    • Organization
      • Department of metrological traceability and national standards
        • Department for scientific metrology
        • Department for industrial metrology
        • Department for the ensuring of metrological traceability
      • Sector for Verification of Measuring Instruments
        • Section for measuring instruments intended for use in trade and check of pre-packed products
        • Section for measuring instruments used for the protection of human and animal health and of general safety and security
        • Section for measuring instruments intended for use in the protection of property, environment and natural resources, occupational health and safety, protection against accidents and traffic control
      • Section for Control of Precious Metal Articles
      • Section for International Cooperation
      • Service for administration and finance
    • Scientific-research activity
    • Meet Our Team
      • Organization Scheme
      • Biographies
      • List of Employees
    • Professional training
  • SERVICES
    • Calibration of measuring instruments/measurement standards
      • Laboratory for Mass
      • Laboratory for Large Mass
      • Laboratory for Pressure
      • Laboratory for Length
      • Laboratory for Electrical Quantities
      • Laboratory for Electrical Power
      • Laboratory for Temperature
      • Laboratory for Time and Frequency
      • Laboratory for Small Volumes
      • Laboratory for Large Volumes
      • Laboratory for Ionizing Radiation
    • Verification of measuring instruments
      • Authorized persons
      • Laboratory for verification of instruments measuring speed of vehicles
      • Laboratory for verification of Breath Analysers
      • Laboratory for Testing of Pre-Packaged Products
      • Laboratory for verification of measuring instruments used in geodesy
      • Laboratory for verification of phonometers
      • Laboratory for verification of flue gas analysers
    • Control of precius metal articles
      • Laboratory for Testing of Precious Metal Articles
      • Importers’/ Manufacturers’ Mark
    • Type approval
      • Approved types of measuring instruments
  • QUALITY SYSTEM
    • Quality Committee
    • CMC
      • BIPM KCDB
    • CAF
  • INTERNATIONAL COOPERATION
  • PROJECTS
  • LIBRARY
    • Regulations
    • Requests
    • Internal acts
    • Journal
      • Official Metrology Journal 1
      • Official Metrology Journal 2
      • Official Metrology Journal 3
      • Official Metrology Journal 4
      • Official Metrology Journal 5
      • Official Metrology Journal 6
      • Official Metrology Journal 7
      • Official Metrology Journal 8
      • Official Metrology Journal 9
      • Metrološki glasnik 10
    • Work program
      • 2013.
      • 2014.
      • 2015.
      • 2016.
      • 2017.
      • 2018.
      • 2019.
      • 2020.
      • 2021.
      • 2022.
      • 2023.
    • Work report
      • 2012.
      • 2013.
      • 2014.
      • 2015.
      • 2016.
      • 2017.
      • 2018.
      • 2019.
      • 2020.
      • 2021.
      • 2022.
    • Communications strategy 2019-2021.
      • Akcioni plan za 2020.
      • Evaluacija KS jan-dec-2019
      • KS
      • Evaluacija KS jan – dec 2020.
    • CAF akcioni plan 2020 – 2022.
    • Publications
      • Monografija – 10 godina
      • Brochures
      • Leaflets
      • Posters
      • History of metrology
      • Etalon vašeg povjerenja
      • Svjetski dan metrologije 2021.
      • Bilten – 15 godina
    • Archived
  • MEDIA CENTAR
    • News
    • Portal analitika
      • Ko ima najtačniji metar i najtačniji kilogram u Crnoj Gori?
      • Kristali crnogorskih učenika pred žirijem
      • I nakit mora na pregled rendgenom
      • Sektor za ovjeravanje mjerila garant preciznosti u Crnoj Gori
      • Kilogram je mrtav! Živio kilogram!
      • Podrška svima kojima je tačno mjerenje temperature važno
      • Borba sa nevidljivim protivnikom: Radioaktivna opasnost u našim domovima
      • Pouzdanost taksimetara neopodno kontrolisati na svakih godinu dana
      • Najprecizniji sat u Crnoj Gori i njegova uloga u mjerenju tačnog vremena u svijetu
    • Press clipping
    • Gallery
      • 08.-13.09.2016. Istorija metrologije
      • 25-27.09.2018. Art of Measurement
      • 10.10.2018. Why are measurements important
      • dec. 2018. – maj 2019. Ljepota kristala
      • 20.05.2019. Dodjela nagrada
      • Workshop: „Chemistry All Around Us“
    • Video
    • Click on Lab
  • CONTACT
  • English
    • Crnogorski Crnogorski
Newsdcadmin2021-03-02T08:03:44+00:00
dcadmin2023-06-01T07:27:09+00:00

(Crnogorski) Radionica „Mjerenja kao podrška prehrambenom sistemu”

dcadmin2023-06-01T07:27:09+00:00May 31st, 2023|Comments Off on (Crnogorski) Radionica „Mjerenja kao podrška prehrambenom sistemu”

Sorry, this entry is only available in Crnogorski.

dcadmin2023-05-31T09:34:48+00:00

(Crnogorski) Radionica za predstavnike Metrološke inspekcije

dcadmin2023-05-31T09:34:48+00:00May 31st, 2023|Comments Off on (Crnogorski) Radionica za predstavnike Metrološke inspekcije

Sorry, this entry is only available in Crnogorski.

dcadmin2023-05-31T09:23:32+00:00

(Crnogorski) Tehnički komitet za protok

dcadmin2023-05-31T09:23:32+00:00May 31st, 2023|Comments Off on (Crnogorski) Tehnički komitet za protok

Sorry, this entry is only available in Crnogorski.

dcadmin2023-05-31T09:18:42+00:00

(Crnogorski) Potvrđeno važenje sertifikata

dcadmin2023-05-31T09:18:42+00:00May 31st, 2023|Comments Off on (Crnogorski) Potvrđeno važenje sertifikata

Sorry, this entry is only available in Crnogorski.

dcadmin2023-05-09T06:54:45+00:00

(Crnogorski) Novi SI prefiksi

dcadmin2023-05-09T06:54:45+00:00May 9th, 2023|Comments Off on (Crnogorski) Novi SI prefiksi

Sorry, this entry is only available in Crnogorski.

dcadmin2023-05-08T13:16:06+00:00

(Crnogorski) Četvrti sastanak WELMEC e.V. Komiteta

dcadmin2023-05-08T13:16:06+00:00May 8th, 2023|Comments Off on (Crnogorski) Četvrti sastanak WELMEC e.V. Komiteta

Sorry, this entry is only available in Crnogorski.

dcadmin2023-04-27T09:08:30+00:00

(Crnogorski) Svjetski dan metrologije 2023.

dcadmin2023-04-27T09:08:30+00:00April 27th, 2023|Comments Off on (Crnogorski) Svjetski dan metrologije 2023.

Sorry, this entry is only available in Crnogorski.

dcadmin2023-04-10T13:33:04+00:00

(Crnogorski) Obuka o Zakonu o javnim nabavkama

dcadmin2023-04-10T13:33:04+00:00April 10th, 2023|Comments Off on (Crnogorski) Obuka o Zakonu o javnim nabavkama

Sorry, this entry is only available in Crnogorski.

dcadmin2023-04-07T11:55:28+00:00

(Crnogorski) Stručna praksa za studente Metalurško-tehnološkog fakulteta

dcadmin2023-04-07T11:55:28+00:00April 7th, 2023|Comments Off on (Crnogorski) Stručna praksa za studente Metalurško-tehnološkog fakulteta

Sorry, this entry is only available in Crnogorski.

dcadmin2023-04-05T11:49:59+00:00

(Crnogorski) U Švajcarskoj održan Tehnički komitet za kvalitet

dcadmin2023-04-05T11:49:59+00:00April 5th, 2023|Comments Off on (Crnogorski) U Švajcarskoj održan Tehnički komitet za kvalitet

Sorry, this entry is only available in Crnogorski.

dcadmin2023-04-03T08:13:01+00:00

(Crnogorski) Sastanak CEFTA država o podsticanju zajedničkog regionalnog tržišta

dcadmin2023-04-03T08:13:01+00:00April 3rd, 2023|Comments Off on (Crnogorski) Sastanak CEFTA država o podsticanju zajedničkog regionalnog tržišta

Sorry, this entry is only available in Crnogorski.

dcadmin2023-03-29T07:37:22+00:00

(Crnogorski) Obuka o načinu objavljivanja najboljih kalibracionih i mjernih mogućnosti

dcadmin2023-03-29T07:37:22+00:00March 29th, 2023|Comments Off on (Crnogorski) Obuka o načinu objavljivanja najboljih kalibracionih i mjernih mogućnosti

Sorry, this entry is only available in Crnogorski.

dcadmin2023-03-21T10:30:05+00:00

(Crnogorski) Sertifikaciona provjera

dcadmin2023-03-21T10:30:05+00:00March 21st, 2023|Comments Off on (Crnogorski) Sertifikaciona provjera

Sorry, this entry is only available in Crnogorski.

dcadmin2023-03-06T08:18:11+00:00

(Crnogorski) Sastanak predstavnika Uprave za inspekcijske poslove i Zavoda za metrologiju

dcadmin2023-03-06T08:18:11+00:00March 6th, 2023|Comments Off on (Crnogorski) Sastanak predstavnika Uprave za inspekcijske poslove i Zavoda za metrologiju

Sorry, this entry is only available in Crnogorski.

dcadmin2023-03-06T08:14:05+00:00

(Crnogorski) Prikaz stanja u oblasti evropske standardizacije

dcadmin2023-03-06T08:14:05+00:00March 6th, 2023|Comments Off on (Crnogorski) Prikaz stanja u oblasti evropske standardizacije

Sorry, this entry is only available in Crnogorski.

dcadmin2023-03-01T08:55:44+00:00

(Crnogorski) Sastanak Radne grupe za opštu primjenu MID i NAWI direktiva

dcadmin2023-03-01T08:55:44+00:00March 1st, 2023|Comments Off on (Crnogorski) Sastanak Radne grupe za opštu primjenu MID i NAWI direktiva

Sorry, this entry is only available in Crnogorski.

dcadmin2023-03-01T08:50:24+00:00

(Crnogorski) Korišćenje baze podataka Međunarodnog biroa za tegove i mjere

dcadmin2023-03-01T08:50:24+00:00March 1st, 2023|Comments Off on (Crnogorski) Korišćenje baze podataka Međunarodnog biroa za tegove i mjere

Sorry, this entry is only available in Crnogorski.

dcadmin2022-12-29T10:11:16+00:00

(Crnogorski) Ugovor o saradnji sa Srednjom stručnom školom „Spasoje Raspopović“

dcadmin2022-12-29T10:11:16+00:00December 29th, 2022|Comments Off on (Crnogorski) Ugovor o saradnji sa Srednjom stručnom školom „Spasoje Raspopović“

Sorry, this entry is only available in Crnogorski.

dcadmin2022-12-27T14:36:46+00:00

(Crnogorski) Klik na lab – Dragocjeni metali

dcadmin2022-12-27T14:36:46+00:00December 27th, 2022|Comments Off on (Crnogorski) Klik na lab – Dragocjeni metali

Sorry, this entry is only available in Crnogorski.

dcadmin2022-12-26T14:12:30+00:00

(Crnogorski) Standard ISO 14001:2015

dcadmin2022-12-26T14:12:30+00:00December 26th, 2022|Comments Off on (Crnogorski) Standard ISO 14001:2015

Sorry, this entry is only available in Crnogorski.

12Next
© Zavod za metrologiju   |   All Rights Reserved   |
FacebookTwitterYouTubeInstagramLinkedIn